We love flaunting our sticker collection by pasting it on car windshields and windows, and we are sure so do you! At times, you may also need to attach stickers to your cars for safety purposes or obligatory reasons like a parking permit. You can use decorative stickers as an expression of your thoughts and personality. Or use them to promote your business or support a cause.
Stickers give your car a unique personal touch and can be fun. But, they are not easy to get rid of once you need to remove or replace them. Some of you might be able to relate to the frustrating experience of trying to peel a sticker off car windows. You can end up with only half the sticker coming off or leaving behind an unwanted adhesive residue. If you are unaware of safe and effective sticker removal methods, you will probably end up damaging the glass.
Therefore, in this article, we will share some quick and easy ways of removing stickers from car windows. These sticker removal methods could safely remove stickers without scratching or damaging the surface and require supplies and materials you are likely to have at home already. Let’s jump right into how to remove stickers from car windows.
08 Methods-How to Remove Stickers From Car Windows
The Hot, Soapy Water Method
According to us, this is the safest and easiest sticker removal method. It works most of the time. If it does not work, switch to other ways involving harsher chemicals. This method requires basic supplies like hot water, dish soap, and a washcloth. Remember to use gloves as you will be working with boiling water. First, mix hot water and some dish soap or liquid detergent.
Begin with scratching the sticker from a corner and then pour or spray the soapy water generously over the sticker. Let the warm soapy water sit over the sticker for a few minutes for it to soften the traces and dissolve the adhesive. Use your fingernail or a scrapper and gently peel the sticker off the glass. Once you have removed the sticker, use the washcloth to wipe out the adhesive residue. This method works well for stickers pasted on the glass for a short period. If it fails, move on to the next one!
Sticker Removal with Heat
Heat makes the sticker supple and melts the adhesive allowing for easier removal of stickers. If hot water does not remove the sticker properly, try using a hair dryer or a heat gun. Also, this method does not involve any harsh chemicals. Hold the hair dryer or heat gun over the sticker for a couple of minutes, beginning at the center and slowly moving towards the edges. Once the sticker loses its strength, start peeling it from the corners and carefully pull it away from the window. Use warm water to soften the adhesive residue and remove it with a towel or a scraper.
Read Also: How to Get Stickers Off Wood
Use a Degreasing Spray
A degreaser is excellent at making things pliable and is particularly helpful in removing stickers off car windows. You can use any good quality degreasing spray like WD40 or Goo Gone lying at home. These products serve numerous cleaning requirements and are highly effective for stubborn stickers and sticky residue. Start by peeling the sticker from the window through your fingernail.
Make sure to entirely remove the sticker and then apply the degreaser to the sticker residue. Allow it to soak in for several minutes, then use a rag or damp cloth to wipe off the greasy residue. A degreaser withers the stickiness completely. You can easily rub it off with a wet towel or even an old credit card. Remember to clean the window afterward with a microfiber towel and warm soapy water.
The Nail Polish Remover Method
This sticker removal method is effective for difficult, inflexible stickers that refuse to go away. Since it has harsh chemicals like acetone, it works like magic and removes the sticker and white glue residue within minutes. But, you also need to be careful while applying this method and protect the paint and plastic body of the car from the product.
Soak a cotton pad or a cloth in the nail polish remover thoroughly. Now, dab the product onto the sticker carefully, ensuring it does not ruin the paint job. Once the sticker is fully moistened, use a razor blade to scrape it. Remember to be gentle as we do not want to damage or scratch the surface of the glass. After you have finished, wash off the remaining residue with good-quality car wash soap and a microfiber towel.
Window cleaning spray is an excellent cleaning supply for removing dirt and debris from glass windows. It must be lying in your kitchen or garage already. You can use it to smoothly and efficiently remove stickers and clean sticky residue. Spray the window cleaning solution on the sticker and let it rest for a few minutes until the sticker becomes slippery.
Use a razor blade and start pulling the sticker carefully from the edges. To remove the sticker without scratching the glass, hold the razor at an angle and slowly peel it away from the glass. Keep spraying, scraping, and wiping until the sticker lifts off completely. Clean the window thoroughly with a glass cleaning solution and a microfiber cloth or towel. We recommend using an ammonia-free glass cleaner for this process.
Remove Stickers with Rubbing Alcohol
You can also remove stickers from your car windows by rubbing alcohol. Soak a couple of cotton balls or a clean rag with rubbing alcohol. Press the wet rag or cotton buds onto the sticker. Let it stay for a few minutes, and allow the alcohol to soften the sticker and dissolve the adhesive.
Start peeling the sticker from the corners once it is saturated. If you notice leftover residue, use a plastic scrapper, old credit card or razor blade to gently and carefully remove it. Wipe the window clean after with a window cleaning spray and paper towel. You can apply the same method for removing stickers from plastic and wood.
Read Also: How to make stickers sticky again
Use Peanut Butter
You may find it hard to believe, but peanut butter is an excellent cleaning solution for unwanted stubborn sticker residue. Cover the sticker with peanut butter using a spatula. Let it rest on the windshield or window until it saturates the stickers, allowing easy removal. Wipe the sticker off with a damp cloth and clean the glass with a window cleaner.
Cooking Oil and Baking Soda Mix
It is a safe method of removing stickers from car windows that do not involve any harsh, toxic chemicals. You will need baking soda and cooking oil like canola or olive oil, and both things must already be there in your kitchen cabinets. Mix them together and apply the mixture to the sticker with a sponge. Let it soak for a couple of minutes. Peel the sticker with your fingernails or use a paper towel to remove it. Scrape the leftover residue with a plastic card or scrapper and clean the window with soapy water or glass cleaning solution to wipe away the oil.
Note: do not apply this method on tinted car windows as it could damage the tint.
Check This: How to remove stickers from metal
Whether you have personalized your cars with stickers or pasted them for obligatory reasons, there will come a time when you would have to say goodbye to them. We hope that this comprehensive guide will help you remove them without hassle. Removing stickers from the car windows can be quick and easy if you know the appropriate method and technique.
However, you have to be careful not to damage or scratch the glass surface in the process. If you let the stickers stay on the car windows, they become hard to remove. Therefore, removing and replacing auto stickers regularly helps avoid a tricky situation. No matter which method you apply to get stickers off car windows, clean the windows or windshield properly after finishing the job.
I am Mason, a Team Leader & Writer, a proactive and collaborative individual who works closely with my team to achieve shared goals. I am skilled in managing projects and am able to lead my team to success by setting clear expectations, providing guidance and feedback, and fostering a positive and productive work environment. I have a deep understanding of printers, sticker printers, label makers, sublimation, and craft markets, and use my knowledge to produce high-quality content that is both informative and trusted for the readers.